Table of Contents
Advertisement
Modifying the default user settings
To modify the default settings for a site user:
1.
Select Site Management > User Management > Users. The "User List"
table appears.
2. Click Set User Defaults. The "User Defaults" table appears.
3. Enter the information for the site. You can set the default value for
•
the maximum allowed amount of space (MB) on the hard disk drive
available to a newly created user for their file storage and Web pages
•
the number of sites users to display at one time in the "User List" table
✍
Note: If there are more site users on a virtual site than the value you
enter here, navigation buttons for scrolling through the "User List"
table become active at the top of the table.
•
the format for generating user login names
•
initial plus last name
•
last name
•
first name
You can also enable or disable services for telnet/shell access, FrontPage
User Web and Secure POP3 (APOP), if the RaQ XTR Administrator has
enabled these services for the virtual site.
4.
Click Save Changes. The system saves the settings and the "Users List"
table reappears.
Once you have configured the default settings, you can adjust some of the
settings for each site user. See "Changing user settings" on page 68.
Cobalt RaQ XTR User Manual
User management
61
Advertisement
Table of Contents
