Table of Contents
Advertisement
Chapter 2: Setting up the Qube 3
To set up the Qube 3 for the Administrator, you must enter a Password in this
field. For guidelines on choosing a password, see "Password guidelines" on
page 26.
✍
Note: We recommend that you reserve the email account admin for
system messages and alerts only, and that you do not publicize this
admin account. To send comments or suggestions to the Qube 3
Administrator, create instead an email alias such as sysadmin for
that user.
For information on how to add an email alias, see "Adding an email
alias for a user" on page 112.
Be sure to remember the password to access the Qube 3 Administration features
in the future.
If you forget the password or want to reset the password, see "Resetting the
Qube 3 Administrator password" on page 103.
If you want to change the password for the Qube 3 Administrator, see
"Modifying account information" on page 90.
Click the right arrow at the bottom to move to the next screen.
Password guidelines
Use the following guidelines when choosing a password:
1. Use between three and sixteen alphanumeric characters.
The valid characters include: a-z A-Z 0-9 % ! @ $ ^ & * - _ = \ | . ,
/ ? ; : +
2. Use both upper- and lower-case letters.
✍
Note: A password is case-sensitive.
3. Do not use a proper name.
4. Do not use a word found in a dictionary.
5. Do not use a date.
6. Do not use a command word.
7. Do not use a string of consecutive keys on a keyboard (for example,
"qwerty").
26
Cobalt Qube 3 User Manual
Advertisement
Table of Contents
