Dynamic Host Configuration Protocol (Dhcp) Server; Dhcp Settings Table - Cobalt Digital Inc COBALT Qube 3 User Manual

Chapter 5: Administration Site
Dynamic Host Configuration Protocol (DHCP)
server
Caution: If a DHCP server is already present on your network, do
not configure the Qube 3 to act as a DHCP server.
!
The Dynamic Host Configuration Protocol (DHCP) feature allows the Qube 3 to
assign automatically the network configuration information to network devices
that support DHCP, including Macintosh and Windows desktop computers. This
information includes the domain name, DNS server(s), IP address, subnet mask
and gateway.
To configure the DHCP settings:
1. Select Administration > Network Services > DHCP to open the following
table.
Figure 67. DHCP Settings table
146 Cobalt Qube 3 User Manual