Cleaning The Cutting Carriage Roller - Roland VersaUV LEC2-300 Regular Maintenance Manual

Cleaning the Cutting Carriage Roller

Paper dust affixes to the separating knife carriage roller during media separation. Periodically wipe the area clean.
WARNING
CAUTION
IMPORTANT
• This machine is a precision device and is sensitive to dust and dirt. Perform cleaning on a daily basis.
• Never attempt to oil or lubricate the machine.
Clean by wiping with a cloth moistened by neutral detergent diluted with water then wrung dry.
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause fire.
Before attempting cleaning, switch off the sub power and wait until the UV-LED
device cools (approximately 15 minutes).
Sudden movement of the machine may cause injury, or hot components may
cause burns.
Cleaning the Machine
2.Regular Maintenance
11