Cleaning The Knife Carriage Roller - Roland TrueVIS SG2-640 Regular Maintenance Manual

Cleaning the Machine

Cleaning the Knife Carriage Roller

Paper dust affixes to the separating knife carriage roller during media separation. Periodically wipe the area clean.
WARNING
CAUTION
IMPORTANT
• This machine is a precision device and is sensitive to dust and dirt. Perform cleaning on a daily basis.
• Never attempt to oil or lubricate the machine.
Clean by wiping with a cloth moistened by neutral detergent diluted with water then wrung dry.
10
2. Regular Maintenance
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause fire.
Before attempting cleaning, switch off the sub power and wait until the heater and dryer
cool (approximately 30 minutes).
Sudden movement of the machine may cause injury, or hot components may cause burns.