Roland VersaUV LEC2-300 Regular Maintenance Manual page 33

C
Remove any hardened ink on top of the print head caps.
Use a pair of tweezers to remove pieces of hardened ink having a length of 3 mm (0.12 in.) or more.
IMPORTANT
Do not use excessive force to pull on hardened ink that is difficult to remove. Doing so may damage the
print head caps.
D
Close the right cover.
E
Close the front cover.
F
Press [ENTER].
FINISHED?
The screen shown below appears, and then cleaning starts. The (approximate) remaining time for the
procedure is displayed on the screen. (The display shown below is an example. "01:45" = "1 minute and
45 seconds")
CLEANING...
>>
When finished, the screen shown below appears again.
CLEANING
POWERFUL CL.
G
Press [FUNCTION] to go back to the original screen.
3.
Perform a printing test to check the results.
Procedure
A
Load the media.
" User's Manual (https://webmanual.rolanddg.com/LEC2-300)
B
Press [FUNCTION].
C
Press [ ], then [ ] to display the screen shown below.
CLEANING
TEST PRINT
01:45
2.Regular Maintenance
Manual Cleaning
31