Roland VersaUV LEC2-300 Regular Maintenance Manual page 32

Manual Cleaning
2.
Clean the print head caps.
Procedure
A
Open the right cover.
B
Clean the locations shown in the following figure.
Be especially careful to clean away any fibrous dust (lint).
After wiping off the hooked side of the wiper (a) with a cleaning stick, wipe off the
1
opposite side (b).
Wipe off the area in the figure with a cleaning stick.
2
Use the wide surface of the cleaning stick, and then shift it to a different location,
3
pressing the cleaning stick against the location to absorb the dirt there.
30
b
a
2.Regular Maintenance