Carton Contents / Item Checklist - Rinnai Slimfire 252 Operation & Installation Manual

WARNINGS & IMPORTANT INFORMATION

CARTON CONTENTS / ITEM CHECKLIST

The components for Slimfire 252 heater are supplied in separate cartons, the following tables list which components
are in each carton. Ensure that the components listed for the installation method being installed are present before
proceeding with the installation.
The Engine and Fascia are packed into two separate cartons and are required for all installation
types. Masonry installations may require a flexiliner flue to be installed, refer to "MASONRY FLUE
INSTALLATION" on page 21 for details. The Zero Clearance Kit and flue are purchased separately.
IMPORTANT
A
2
5
3
COMPONENTS DESCRIPTION
(1) Rinnai Slimfire 252 Engine.
(2) Artificial log set / burn media, Satchel burner granules (packed on top of the engine).
(3) ½" BSP Flared nut (x1shipped inside engine, attached to gas connection).
(4) Adhesive backed foam sealing strip.
(5) Operation and Installation manual.
(6)
Fascia Mounting Screws (x2 pre-installed in the engine fascia mounting brackets).
(7) Fascia.
(8) Glass dress guard.
(9) Transition box rails (x2).
(10) Transition box upper.
(11) Transition box lower.
(12) Transition box guide plate.
(13) Zero Clearance Box - Top panel.
(14) Zero Clearance Box - Base panel.
(15) Zero Clearance Box - Rear panel.
(16) Zero Clearance Box - Left & Right side panels.
(17) Packet assembly screws, rivets and grommet.
Rinnai
B
2
5
8
4
8
C
10
16
15
12
11
14
17
9
CARTON CONTENTS
( A )
Engine
13
16
( B ) ( C )
Zero
Fascia Clearance
Kit
RIBF25 OIM