Iso Parameters; Protection Parameter Setting - Sungrow SG36KTL-M User Manual

User Manual
Enter password (Press ENTER, Press )→Run-param (Press
Derating param (Press ENTER)

10.10.10 ISO Parameters

Main Screen (Press
Enter password (Press ENTER, Press )→Run-param (Press
ISO param (Press ENTER)

10.11 Protection Parameter Setting

Protection parameters are designed for the threshold value that can trigger the
protection function of the inverter.
Main Screen (Press ENTER)→Menu (Press ×3)→Set-param (Press ENTER)→Enter
password (Press ENTER, Press ×2)→Pro-param (Press ENTER)
Press  to move cursor and Press
User can only check the parameter in this interface. The default values of the
protection parameters have been preset as per grid code of corresponding
countries.
To set the protection parameter, please contact Sungrow to acquire advanced
password.
Derating param
Fre-Derating
F1
P1
F2
P2
F3
P3
ENTER )→Menu (Press
ISO param
ISO [ON/OFF]
ISO pro value
 to input the password.
10 Operation of LCD Display
[ON/OFF]
50.00Hz
100%
50.20Hz
100%
52.00Hz
100%
×3)→Set-param(Press ENTER)→

30kΩ
ENTER, Press ×4)→
ENTER, Press ×5)→
81