Microtek ArtixScan 3200XL Start Here Manual page 9

Scanning Positive or Negative Film
1. Select the film you wish to scan, then follow the procedures
for positioning transparent films, as detailed in the
"Positioning Transparencies" section of this guide.
2. Launch ScanWizard Pro.
3. If scanning positive film such as 35mm slides:
a) Go to the Preview window of ScanWizard Pro and from
the Scan Material menu, choose Positive / Positive
Film.
b) Follow steps 4 to 7 of the procedures detailed in
"Scanning Photos".
If scanning negatives:
a) Go to the Preview window of ScanWizard Pro and from
the Scan Material menu, choose Negative / Negative
Film. The Negative Scan Settings window appears.
b) Go to the Negative Scan Settings window, choose the film brand, film type, and ISO settings that
match the film you use. For more details, refer to "ScanWizard Pro Reference Manual" in your
Microtek Software CD/DVD and see the Addendum to ScanWizard Pro section.
c) Follow steps 4 to 7 of the procedures detailed in "Scanning Photos".
4. Click the Scan (or "Batch") button in the Preview window or on the scanner unit to start scanning.
Settings window
Preview window
9
Calibration strip
(Keep clear and unobstructed)
Smart-Touch button (Scan)
Negative Scan Settings window
(only for negative film scanning)