Cf Card Installation And Removal - Pro-face GP2000H Series User Manual

3.5

CF Card Installation and Removal

When using the GP2000H unit and a CF Card, use the follow-
ing precautions:
• Prior to inserting or removing a CF Card, turn the GP unit's
CF Card Access Switch OFF, and confirm that the Access
lamp is not lit, to prevent damage to or loss of the CF Card's
internal data.
• When a CF Card is being accessed, NEVER:
• turn OFF or reset the GP2000H unit
• insert or remove the CF Card
Prior to performing these operations, create and use a spe-
cial GP application screen that will prevent access to the
CF Card.
• Prior to inserting a CF Card, familiarize yourself with the
CF Card's front-face and rear-face orientation, as well as
with the CF Card connector's position. To prevent damage
to either the CF Card's internal data or the GP unit, the
CF Card must be correctly positioned when it is inserted
into the multi-unit.
• Use only CF Cards manufactured by Digital Electronics Cor-
poration. Otherwise, the CF Card data may be damaged.
• Lost GP data cannot be recovered. Since accidental data
loss can occur at any time, be sure to back up all GP screen
and CF Card data regularly.
• Be sure to follow the instructions given below to prevent
the CF Card's internal data from being destroyed or a
CF Card malfunction from occurring:
• Do NOT bend the CF Card.
• Do NOT drop or strike the CF Card against other objects.
• Keep the CF Card dry.
• Do NOT touch the CF Card connectors.
• Do NOT disassemble or modify the CF Card.
GP2000H Series User Manual
Chapter 3 – Handling and Wiring
CAUTIONS
Refer to the Pro-Designer On-line Help
3–13