Switching Dout Output Current Direction - Pro-face GP2000H Series User Manual

Chapter 3 – Handling and Wiring

3.3.4 Switching DOUT Output Current Direction

GP2000H Series units can switch the direction of the DOUT output current. As
shown below, each direction corresponds to either Sink output or Source output.
The factory setting is for Sink type output.
GP 2000H Series units that can switch the current direction includes all units with
Revision 2 marking (2A, 2B, 2C, etc.). For a description of how to identify your
unit's revision code, see Preface - Page 13.
For Circuit drawings for the Output Sink type and Output Source type units,
Output Sink Type
Provides current from pin 2 (DOUT0.C)/ pin 4 (DOUT1.C) to pin 7
(DOUT.GND)
Pin No.
2
4
Output Source Type
Provides current from pin 7 (DOUT.GND) to pin 2 (DOUT0.C)/ pin 4
(DOUT1.C)
Pin No.
2
4
3–10
2.3 Interfaces External Output I/F Circuit
GP Internal
Signal Name
Current Direction
DOUT0.C
DOUT1.C
GP Internal
Signal Name
Current Direction
DOUT0.C
DOUT1.C
Pin No. Signal Name
7 DOUT.GND
Pin No. Signal Name
7 DOUT.GND
GP2000H Series User Manual