Serial Interface
Connector
DC 24V Interface
Connector
3.3.2 Cable Installation
1. Loosen the seven (7) cable cover attach-
ment screws* on the rear of the GP unit.
* These screws cannot be removed.
2. Connect each of the cable's three (3)
connectors to its corresponding inter-
face connector (see below).
GP2000H Series User Manual
Chapter 3 – Handling and Wiring
Termination
Resistance Switch
External Output
Interface Connector
GP2000H
unit's Gasket
Interface Connector
GP2000H
Unit's Gasket
Cable
GP2000H unit's Rear Face
Cord Guard
Cable
Cable
Cover
3–7