Wiring Cautions; Wiring - Pro-face GP2000H Series User Manual

Chapter 3 – Handling and Wiring
3.3

Wiring Cautions

3.3.1 Wiring

To avoid an electric shock, be sure the power cord is un-
•
plugged from the power supply when connecting the power
terminals to the GP unit.
The GP2000H Series units use a DC 24V power supply. If
•
the power supply is outside of the rated voltage range, both
the power supply and the GP unit can be damaged.
The GP2000H is not equipped with a power switch. There-
•
fore, be sure to connect a breaker-type power switch to the
GP unit's power cord.
Use the GP2000H Series connection cable to connect to serial interface, DC 24V
interface, external output interface.
The connectable cables (sold separately) are listed below.
Cable Name
GP2000H Series Special Purpose RS-232C Dsub Cable (3M) GP2000H-D232-3M
GP2000H Series Special Purpose RS-232C Dsub Cable
(10M)
GP2000H Series Special Purpose RS-232C Cable (3M)
GP2000H Series Special Purpose RS-232C Cable (10M)
GP2000H Series Special Purpose RS-422 Dsub Cable (3M) GP2000H-D422-3M
GP2000H Series Special Purpose RS-422 Dsub Cable (10M) GP2000H-D422-10M
GP2000H Series Special Purpose RS-422 Cable (3M)
GP2000H Series Special Purpose RS-422 Cable (10M)
GP2000H Series Special Purpose GP-H70 Series RS-232C
Conversion Adapter Connection Cable (3M)
GP2000H Series Special Purpose GP-H70 Series RS-422
Conversion Adapter Connection Cable (3M)
When the termination resistance needs to be set up, turn ON the dip switch beside
the serial interface. The termination resistance of 100
RDB. The default setting is OFF.
3–6
WARNINGS
Ω
GP2000H Series User Manual
Model
GP2000H-D232-10M
GP2000H-C232-3M
GP2000H-C232-10M
GP2000H-C422-3M
GP2000H-C422-10M
GP2000H-AP70CB-D232-3M
GP2000H-AP70CB-D422-3M
enters between RDA and