Chapter 3 – Handling and Wiring
3.1.2 Hand Strap
Attaching the Hand Strap
The hand strap that attaches to the GP2000H Series unit is used to hold the GP
unit by hand, and to prevent it from dropping during use. Attach the hand strap
using the following procedure (images of the GP-2301H are used, but the proce-
dure is the same for the GP-2401H):
1. Insert the hand strap into the strap an-
chors on the sides of the GP unit, and
fold back both ends.
2. Adjust the length of the hand strap, and
secure the strap with the velcro strip.
Be sure to keep your left hand through the hand strap when operating
the GP unit.
3–2
GP2000H Series User Manual