Optional Items - Pro-face GP2000H Series User Manual

External Interfaces (cont.)
Product Name
Mitsubishi A Series
Programming Port I/F Cable
Mitsubishi FX Series
Programming Port I/F Cable
GP2000H Series RS-232C
Conversion Adapter
GP2000H Series RS-422
Conversion Adapter
CF Card Items
Product Name
CF Cards
CF Card Adapter

Optional Items

Product Name
Screen Protection Sheet
(5 sheets/set)
Neck Strap
Wall Mount Adapter
Maintenance Items
They are available separately as optional maintenance items.
Product Name
Hand Strap
Emergency Switch
Guard
CF Card Interface Guard
*1 The CF Card Interface Guard is used in a NEMA#250 TYPE4X/12 environment.
Units that are Revision A or later correspond to a NEMA#250 TYPE4X/12 rating. For
a description of how to identify your unit's revision code, see the Preface - Page 13.
GP2000H Series User Manual
Chapter 1 – Introduction
Model No. Description
Connects directly to Mitsubishi's PLC I/F
GP430-IP10-0
Programming Console. Simultaneous use
of program console, however, is not
GP430-IP11-0
possible.
Conversion adapter to convert serial data
GP2000H-AP232
to RS-232C Dsub format.
Conversion adapter to convert serial data
GP2000H-AP422
to RS-422 Dsub format.
Model No. Description
GP077-CF20 GP Series CF Card (16MB)
GP077-CF30 GP Series CF Card (32MB)
CF Card Adapter for standard PC Card
GP077-CFAD10
Slot.
Model No. Description
Disposable protective, dirt-resistant sheet
for the GP unit's screen. The GP unit's
GP2000H-DF10
touch panel can be used with this cover
sheet attached.
Strap used to hang GP unit from neck
GP2000H-ST RAP11
while operating.
Fasteners used to mount the GP2000H
CA1-WMALRG-01
Series unit on a stand or wall
Model No. Description
H70-HS00-MS Strap used to hold the GP unit.
Cover used to prevent the Emergency
GP2000H-EMGD11
Switch from be accidentally pushed.
NEMA standard
GP2000H-CFGD11
prevent the CF Card cover from being
accidentally opened or closed.
*1
type fasteners used to
1–5