Chapter 3 Handling And Wiring; Handling The Gp2000H; Wall Mount Adapter / Swivel Mount Arm - Pro-face GP2000H Series User Manual

Chapter
3 Handling and Wiring
3.1

Handling the GP2000H

This section explains cautions involved with handling the GP2000H Series units.
Be sure to operate the GP unit only after securing it, using any of the following
three methods.
Be sure to use the hand strap or neck strap, or attach the GP
unit to a wall with the Wall Mount Adapter. Dropping the unit
may result in injury to the user or damage to the unit.

3.1.1 Wall Mount Adapter / Swivel Mount Arm

The GP2000H Series unit can be attached to either a Wall Mount Adapter or a
commercial arm, as follows:
Attaching the GP2000H to the Wall Mount Adapter
GP + Wall Mount Adapter (CA1-WMALRG-01)
Attaching the GP2000H to a Swivel Mount Arm or Similar Device
GP + commercial VESA compliant arm
The GP2000H unit can be attached to either a commercial, VESA FPMPMI-
approved (75mm) swivel mount arm, or a similar wall-mount device.
GP2000H Series User Manual
1. Handling the GP2000H
2. Interface / Switch Guards
3. Wiring Cautions
CAUTIONS
VESA: Video Electronics Standards Association
FPMPMI: Flat Panel Monitor Physical Mounting Interface –
physical standard specification (set by VESA) for
attaching the liquid crystal display (LCD) to the arm
or stand.
4. Tool Connector
5. CF Card Installation and
Removal
3–1