Wiring Precautions - Pro-face GP3000 Series Installation Manual

Wiring
1.

Wiring Precautions

• To help prevent noise and interference
problems, separate all control,
communication and power lines by placing
them in a separate ducts.
Duct for I/O Duct for Control
Signal Lines Lines
If different wires must be placed in the same
duct, separate them with an earthed/grounded
divider.
I/O Signal Control
Lines Lines
Grounded
Separators
• If the lines cannot be separated, use
shielded lines and create a ground from the
shield line.
• Use noise-reducing external wiring
methods to increase overall system
reliability.
• To prevent power surges or noise
interference, use ducts to separate all
DC I/O or current circuit wires from
communication cables.
• To prevent malfunctions due to noise,
communication cables must be wired
separately from high-frequency lines
and power lines such as high-voltage
lines, high-current lines, and inverters.
Duct for Power
Lines
Power
Lines
Duct (non-
conducting
resin/
Earth/Ground plastic)
Installation prerequisites for
standards
The following units are UL/c-UL listed
products.
(UL File No.E220851, UL File No.E182139)
Product Model No.
AGP3300-L1-D24-CA1M
AGP3300-S1-D24-CA1M
AGP3300-T1-D24-CA1M
AGP3400-S1-D24-CA1M
AGP3400-T1-D24-CA1M
*1 The sales area is limited.
The following units are UL/c-UL recognized
components. (UL File No.E171486, UL File
No.E231702)
Product Model No.
AGP3500-S1-AF-CA1M
AGP3500-T1-AF-CA1M
AGP3510-T1-AF-CA1M
AGP3600-T1-AF-CA1M
*1 The sales area is limited.
The following units are UL/c-UL listed
products.
(UL File No.E220851, UL File No.E210412)
Product Model No.
AGP3500-S1-D24-CA1M
AGP3500-T1-D24-CA1M
AGP3600-T1-D24-CA1M
*1 The sales area is limited.
For the detailed certification's information,
refer to the Pro-face Home page.
6
UL/c-UL
Registration
Model No.
3280007-03
*1
3280007-02
3280007-01
*1
3280035-02
3280035-01
UL/c-UL
Registration
Model No.
*1
3280024-21
3280035-45
*1
3581301-01
3280024-13
UL/c-UL
Registration
Model No.
*1
3280024-22
3280035-41
3280024-14