Sun Microsystems Ultra 60 Manual page 29

7
Installing the CD-ROM Drive or Tape Drive
8. Use a Phillips screwdriver to attach the drive to the RMA using
the four screws provided.
9. Partially slide the RMA into the chassis and attach the cables to
the drive:
• SCSI cable: J0300
• Power cable: P3
JP tasks
KR tasks
TW tasks
PRC tasks
38
10. Complete sliding the RMA into the chassis. Tighten the two
screws holding the RMA to the system chassis.
11. Replace the peripheral bezel on the front of the system.
12. Detach the wrist strap and close the system unit ( 10).