ACV Prestige 24 Solo Installer's Handbook page 36

EN
PRESTIGE SOLO/EXCEL (3-WAY VALVE)
PUMPS (PRESTIGE SOLO/EXCEL (3-WAY VALVE))
The pump configurator system is based on the demands of the hydraulic system that you design. In the
table below, you will find the 4 configurations that have been preset in the ACVMax controller for the
FR
Prestige 24-32 Solo/Excellence (identified as "Solo/Excel. (3-way valve)" in the Prestige Model selection
menu), based on different hydraulic schemes that can be used.
The table shows which relays are activated under which condition.
The names in the table refer to the demand done by CH1 by CH2 or DHW respectively, the demand to
open/close the Motor of a mixing valve or reflect the activation of the alarm (error) or Flame output relay.
NL
In the following pages, you will find these diagrams with a configuration number that corresponds to
the setting in the display.
Config. Flex 4 Flex 6
No ERR P4
ES
1 Error CH2
2 Error CH2
IT
3 Error CH2
4 Error CH1/CH2
DE
PL
RU
en
2-6
Flex 3 Flex 2 Flex 1 Flex 5
P3 DHW CH
CH1/CH2/
CH1 Flame
DHW
CH1/CH2/
CH1 CH1/CH2 Flame
DHW
CH1/CH2/
CH1 Mix open Mix close
DHW
CH1/CH2/
CH1 Mix open Mix close
DHW
The Installer's Handbook - ACVMax: A1004308 - 660Y2900 - Volume 2 • B
FL