ACV Prestige 24 Solo Installer's Handbook page 12

EN
ACVMAX DESCRIPTION AND OPERATION
CH Settings
FR
Heating Settings
Heating Operation Enabled
Demand Thermostat & Outd. Curve
CH maximum capacity 100%
NL
Abs. Max. CH Setpoint 87°C
CH1 Max. Setpoint 82°C
CH1 Min. Setpoint 27°C
ES
Heating Settings
Heating Operation Enabled
Demand Thermostat & Outd. Curve
CH Maximum Capacity 100%
Abs. Max CH Setpoint 87°C
IT
CH1 Max. Setpoint 82°C
CH1 Min. Setpoint 27°C
DE
Heating Settings
Heating Operation Enabled
Demand Thermostat & Outd. Curve
CH Maximum Capactiy 100%
Abs. Max CH Setpoint 87°C
CH1 Max. Setpoint 82°C
PL
CH1 Min. Setpoint 27°C
Heating Settings
RU
Heating Operation Enabled
Demand Thermostat & Outd. Curve
CH Maximum Capacity 100%
Abs. Max CH Setpoint 87°C
CH1 Max. Setpoint 82°C
CH1 Min. Setpoint 27°C
en
1-8
CH Maximum Capacity CH Maximum Capacity limits the maximum CH capacity. The appliance capacity can be defined by adjusting this value, 100% means Maximum
CH output, 0% means minimum CH output. It is therefore possible to adjust the CH capacity to the installation needs.
100%
Example: when set to 60%, the real appliance capacity is the appliance minimum capacity plus 60% of the difference between the maximum and
0% 100%
minimum capacity.
Press the LEFT or RIGHT buttons to adjust the CH Maximum Capacity, then press the OK button to store the setting.
Default: 100%
Abs. Max
Absolute Max CH Setpoint limits the setpoint during a central heating call. This setting can be used to prevent a user from adjusting the central
CH Setpoint
heating setpoint or outdoor curve above a safe operating temperature in the EZ Setup Menu. A warning screen will be displayed in EZ Setup if the
87°C
user attempts to raise the setpoint above the Absolute Max CH Setpoint. The Absolute Max CH Setpoint will be displayed on the outdoor curve in EZ
Setup if the user selects an outdoor curve which goes above the Absolute Max CH Setpoint.
20°C 87°C
Press the LEFT or RIGHT buttons to adjust the Absolute Max CH Setpoint then press the OK button to store the setting.
Default: 87°C
CH1 Max. CH1 Max. Setpoint is the maximum setpoint for a CH1 heating call when an
Setpoint
Outdoor Curve option is chosen in Demand Type. CH1 Maximum Setpoint is
82°C
the fixed setpoint for a CH1 heating call when a Setpoint option is chosen in
Demand Type.
20°C 87°C
Press the LEFT or RIGHT buttons to adjust the CH1 Maximum Setpoint then
press the OK button to store the setting.
Default: 82°C
CH1 Min. CH1 Min. Setpoint is the minimum setpoint for a CH1 heating call when an
Setpoint
Outdoor Curve option is chosen in Demand Type. This setting is not applicable
27°C
when a Setpoint option is chosen in Demand Type.
15°C 87°C
Press the LEFT or RIGHT buttons to adjust the CH1 Minimum Setpoint then
press the OK button to store the setting.
Default: 27°C
The Installer's Handbook - ACVMax: A1004308 - 660Y2900 - Volume 1 • B
CH1 (°C)
82
27
O.T. (°C)
-12 18