A.1
General Specifications
A.1.1
Bus Interface
Form factor: x1 PCI Express, specification v1.1 compliant
Slot compatibility: x1, x4, x8, and x16 PCI Express slots
DMA channel: 1, analog input
A.1.2
Power Requirements
Typical: +3.3 V @ 400 mA, +12 V @ 850 mA
A.1.3
Physical
Printed circuits board dimensions: 9.9 × 16.8 cm (3.9 × 6.6 in.)
I/O connector: 1 × 36-pin VHDCI (mini-SCSI), and 1 × HDMI
A.1.4
Environmental
Operating temperature: 0 to 60°C
Storage temperature: -40 to 70°C
Operating humidity: 10 to 90% RH, non-condensing
Storage humidity: 5 to 95% RH, non-condensing
Indoor use only.
A.2
Input Characteristics
Number of simultaneously sampled input channels: 8, can be enabled/dis-
abled each channel independently by software
Input configuration: Differential/Pseudo-differential (50 Ω between negative
input and chassis ground), software selectable per channel
Input coupling: AC/DC, software selectable per channel
A/D converter (ADC) resolution: 24 bits
A/D converter (ADC) type: Delta-sigma
Sample rates (fs):
–
Range: 100 S/s to 216 kS/s
–
Resolution: 90.95 μS/s (100 S/s to 54 kS/s)
FIFO buffer size: 4,096 samples
Data transfers: Direct memory access (DMA)
PCIE-1802 User Manual
181.90 μS/s (54 kS/s to 108 kS/s)
363.80 μS/s (108 kS/s to 216 kS/s)
24