Assa Abloy Yale Secure Connect MZ-1 Manual page 29

Changing Batteries
Changing Batteries
PIR Video Camer Battery Change
1. Disarm
2. Unscrew
& remove
top case
Key Fob Battery Change
When the battery is low the LED will glow dimly when any key is pressed. The battery is changed as follows:
2.
1.
Unscrew &
Disarm
remove
Press any key and check that the LED lights. If the LED lights the new battery installation is successful.
Key Pad Battery Change
When the battery is low the LED will flash when any key is pressed. The battery is changed as follows:
1. Disarm
2. Unscrew &
remove cover
Press a number key and check that the LED lights.
If the LED lights the new battery installation is successful.
.
•
3. Remove &
replace Batteries
3.
4.
Replace cover
Remove
& replace
battery
3. Remove old
battery
4.
5. Replace cover.
4. Insert new
battery (slot under
2 tabs) & click in
place.
29
29