Assa Abloy Yale Secure Connect MZ-1 Manual page 14

Mounting devices
Mounting Devices
Door/Window Contact
1. The sensor should be on the frame while the magnet should be on the door/window.
Testing
The gap between the magnet and sensor should
be no more than 10mm when closed. Test to see
whether the magnet is in range of the sensor: before
mounting hold the magnet and sensor in place and
then pull them apart. If the sensor LED lights up it
implies the two items are within range.
Clean the mounting surface with a suitable degreaser agent and mount using the adhesive pads.
Clean the mounting surface with a suitable degreaser agent and mount using the adhesive pads
Please note that some surfaces may be unsuitable for mounting using the adhesive pads. Please use
Please note that some surfaces may be unsuitable for mounting using the adhesive pads. Please use
screw mounting in these cases.
screwmounting in these cases.
5
6
14
14
.
•
b
a
1
3
5
or
6
b
7
2
4
7
a
a