Table of Contents
Advertisement
Changing Batteries
Changing Batteries
Always use the correct type of batteries as replacements because any other battery type can cause
problems with the operation of the system. Ensure the correct steps are taken when changing
batteries in tamper protected devices.
Low Battery Indicator
The Hub will start to emit an intermittant beep to indicate that the batteries need changing on one of your
devices.
The hub will continue to beep until the batteries on this device have been replaced, or low battery device is
put into bypass mode. Please note that bypass mode disables the device, and if disabled this device will no
longer be triggered when the alarm is armed.
The app will also display a low battery message under the relevant device when batteries are running low.
When a device first shows the low battery signal in the app, it has enough capacity to operate for
approximately 1 month before complete exhaustion.
Always make sure the system is disarmed before changing any batteries. We recommend you follow the
battery wizard within the app when changing the batteries.
26
26
.
•
Advertisement
Table of Contents
Troubleshooting
