Troubleshooting - Assa Abloy Yale Secure Connect MZ-1 Manual

Troublehooting

Troubleshooting

External Siren
For Siren trouble shooting please refer
to the Strobe light indication chart.
Siren Audio
(optional)
Arm 1 beep *
Home 1 beep *
Disarm 2 beep *
Arm (Low Battery) 5 beeps
Disarm (Low Battery) 5 beeps
Arm (Tamper) 5 beeps
Disarm (Tamper) 2 beeps *
• Siren may not be in range of the Smart Hub
Ensure these are within 30m of each other and
relocate devices if required.
.
•
Strobe light indication
3 LED flashes at once
3 LED flashes at once
Sequentially flashes for 1 cycle
3 LED flashes for three times
Sequentially flashes for 2 cycles
3 LED flashes for three times
Sequentially flashes for 1 cycle
Door/Window Contact
Door/Window Contact LED lights up
• Batteries are low or the tamper switch has been
disturbed. Check that the tamper switch spring is
making contact with the mounting surface. If the
tamper switch is OK, please change the battery.
Door/Window Contact does not respond
• Batteries are completely exhausted. Change the
battery.
• The magnet is too far away from the sensor.
Check that the gap between the sensor and
magnet is not greater
than 10mm.
PIR Motion
Detector
PIR does not respond to motion
• Previous motion may have triggered the PIR
sleep timer, and is preventing subsequent motion
detection. Arm the system and the vacate
protected area for at least 60 seconds before
testing. By pressing the learn/test button the PIR
LED will light up and detect motion for the first
minute.
PIR Motion Detector is slow to respond
• This is normal. The PIR Motion Detector has
sophisticated false alarm filtering to filter out
random fluctuations, and responds to genuine
motion across field of view, the PIR is less
sensitive, when walking directly towards it.
1
3
5
6
b
a
2
a
4
7
31
31