Assa Abloy Yale Secure Connect MZ-1 Manual page 24

Adding & using devices
Adding & Using Devices
Reset Key Pad Code
Reset to factory default (0000) using the following steps:
1. Unscrew
3. Hold down number 3 to discharge and then insert the
new battery.
5. Initiliase your Key Pad. See previous page 22.
6. Learn this into your system.
Disarmed
Part Armed
Armed
Using your Panic Alarm
• Press the panic buttons together for 3 seconds to activate
the alarm.
• Deactivate a panic event by pressing the disarm button
followed by your PIN code.
If there is a system fault, you will need to press the Arm/
Home Arm button for a second time to "force arm" the
system.
24
24
•
3
2. Remove
1
4. Replace cover
1
+
+
PIN CODE
PIN CODE
+
PIN CODE
.
Panic button
Panic button
>3sec.<
>3sec.<
Press the 2 panic buttons together for
Press the 2 panic buttons together for
3 seconds to activate a panic alarm.
3 seconds to activate a panic alarm.
Panic button
>3sec.<
Press the 2 panic buttons together for
3 seconds to activate a panic alarm.