Introduction; Related Documents - SimCom SIM5218E Hardware Design

SIM5218E Hardware Design

1 Introduction

This document describes the hardware interface of the SIMCom SIM5218E module that connects
to the specific application and the air interface. As SIM5218E can be integrated with a wide range
of applications, all functional components of SIM5218E are described in great detail.
This document can help you quickly understand SIM5218E interface specifications, electrical and
mechanical details. With the help of this document and other SIM5218E application notes, user
guide, you can use SIM5218E module to design and set-up mobile applications quickly.

1.1 Related documents

Table 1: Related documents
SN Document name
[1] SIM5218_ATC_V1.00
[2] ITU-T Draft
recommendationV.25ter
:
[3] GSM 07.07:
[4] GSM 07.10:
[5] GSM 07.05:
[6] GSM 11.14:
[7] GSM 11.11:
[8] GSM 03.38:
[9] GSM 11.10
[10] 3GPP TS 51.010-1
[11] 3GPP TS 34.124
[12] 3GPP TS 34.121
[13] 3GPP TS 34.123-1
SIM5218E_HD_V1.03
Remark
SIM5218_ATC_V1.00
new Serial asynchronous automatic dialing and control
Digital cellular telecommunications (Phase 2+); AT command
set for GSM Mobile Equipment (ME)
Support GSM 07.10 multiplexing protocol
Digital cellular telecommunications (Phase 2+); Use of Data
Terminal Equipment – Data Circuit terminating Equipment
(DTE – DCE) interface for Short Message Service (SMS) and
Cell Broadcast Service (CBS)
Digital cellular telecommunications system (Phase 2+);
Specification of the SIM Application Toolkit for the Subscriber
Identity Module – Mobile Equipment (SIM – ME) interface
Digital cellular telecommunications system (Phase 2+);
Specification of the Subscriber Identity Module – Mobile
Equipment (SIM – ME) interface
Digital cellular telecommunications system (Phase 2+);
Alphabets and language-specific information
Digital cellular telecommunications system (Phase 2)； Mobile
Station (MS) conformance specification； Part 1: Conformance
specification
Digital cellular telecommunications system (Release 5); Mobile
Station
(MS) conformance specification
Electromagnetic Compatibility (EMC) for mobile terminals and
ancillary equipment.
Electromagnetic Compatibility (EMC) for mobile terminals and
ancillary equipment.
Technical Specification Group Radio Access Network; Terminal
conformance specification; Radio transmission and reception
(FDD)
5
11.06.2009