Sensor Layout - Agilent Technologies Medalist i3070 5i Series Manual

Sensor Layout

Table 6- 3
signals to the PLC. The following figures show the locations of the sensors
in a left- to- right system. The sensor ID will be marked on labels in the
system.
Table 6-3
Sensor
Zone 1 Inlet Sensor
Zone 1 Stopper Sensor
Zone 1 Exit Sensor
Scanner Front
Scanner Rear
Zone 2 Guide Bar Detect Sensor
Conveyor Right Limit Sensor (Dark-on)
Conveyor Origin Sensor (Dark-on)
Conveyor Left Limit Sensor (Dark-on)
Zone 1 Stopper Up
Zone 1 Stopper Down
Zone 2 Inlet Sensor
Zone 2 Stopper Slow Sensor
Zone 2 Stopper Sensor
Board Align Sensor
Engine Fully In Detect Sensor
Zone 2 Stopper Down
Zone 2 Stopper Up
Zone 2 Exit Sensor
Zone 2 Clear Sensor
Presser Upper Limit Sensor
Presser Home Sensor
Presser Clearance Limit Sensor
Presser Lower Limit Sensor
i3070 Series 5i Help
lists the sensors in the system, together with their IDs and
Sensors
ID Signal to PLC
PHS-1 000
PHS-2 001
PHS-3 002
SV11,1104 RS17, 208
SV12,1105 RS18, 209
PHS-19 306
PHS-25 400
PHS-24 315
PHS-26 401
SV1,1010 RS1, 108
SV2,1011 RS2, 109
PHS-4 003
PHS-5 004
PHS-6 005
PHS-27 402
PHS-9 008
SV4,1013 RS20, 211
SV3,1012 RS19, 210
PHS-7 006
PHS-8 007
PHS-12 011
PHS-14 013
PHS-15 014
PHS-13 012
Troubleshooting
6-15