Compression Spring (Movable Side) - Agilent Technologies Medalist i3070 5i Series Manual

Compression Spring (Movable Side)

Follow this procedure to replace the springs for the Zone 2 conveyor
(movable side).
Removal
1 Remove the right side cover.
2 Remove the movable rail assembly:
7-44
Movable Rail Assembly
a Remove six screws securing one side of the rail assembly.
Movable Guide Holder
Runner Block
b Do the same on the other side and remove the rail assembly.
Spring
Zone 2 Conveyor Assembly
2 screws
4 screws around
the base
i3070 Series 5i Help