Agilent Technologies Medalist i3070 5i Series Manual page 135

3 To remove the spring from the fixed rail assembly:
Installation
1 Assemble the new spring, spring guide, and support plate.
2 Secure the spring guide with one screw from below the assembly.
3 Install the fixed rail assembly in the system, securing it with two
4 Close all covers/doors.
i3070 Series 5i Help
a Remove the screw securing the spring guide from below.
b Remove four screws securing the support plate.
The support plate, spring, and spring guide can now be removed.
Secure the support plate to the rail assembly with four screws.
screws on either side.
Spring Guide
Screw
Support Plate
7-47