Agilent Technologies Medalist i3070 5i Series Manual page 22

Table 2-2 Maintenance
Menu
Zone 1
Zone 2
Scan
Drawer
2-4
Option/Description
Zone 1 Motor
FWD – Start forward movement of Zone 1 conveyor.
REV – Start reverse movement of Zone 1 conveyor.
Stop – Stop Zone 1 conveyor.
Zone 1 Stopper
On – Move Zone 1 stopper up.
Off – Move Zone 1 stopper down.
Zone 1 > 2
FWD – Start forward movement of Zone 1 and Zone 2 conveyors.
REV – Start reverse movement of Zone 1 and Zone 2 conveyors.
Stop – Stop conveyors.
Zone 2 Motor
FWD – Start forward movement of Zone 2conveyor.
REV – Start reverse movement of Zone 2 conveyor.
Stop – Stop Zone 2 conveyor.
Zone 2 Stopper
On – Move Zone 2 stopper down.
Off – Move Zone 2 stopper up.
Zone 1 > 2
FWD – Start forward movement of Zone 1 and Zone 2 conveyors.
REV – Start reverse movement of Zone 1 and Zone 2 conveyors.
Stop – Stop conveyors.
Scanner Trigger
ON – Turn selected scanner on.
OFF – Turn selected scanner off.
Scanner
Front – Select front scanner.
Rear – Select rear scanner.
Drawer Lifter
Up – Move drawer lifter up.
Down – Move drawer lifter down.
To move the drawer lifter, the bottom jig clamp must be unlocked.
Bottom Jig Clamp
Lock – Lock bottom fixture.
Unlock – Unlock bottom fixture.
Touch Panel Functions
i3070 Series 5i Help