Installation - Infinity Sunpanel iPW-150 Rigging Bar V1 Manual

Sunpanel iPW-150 Rigging Bar

Installation

Ordercode: 33201
01) Check whether the Stand Stud Adapter is extended
out of the bottom. Normally, the factory setting is as
shown in fig. 03.
Fig. 03
Fig. 04
02) If the Stand Stud Adapter is set as in fig. 04, please
press it down and turn clockwise by 90 degrees to
keep the screw head line with the slot in the bottom.
Fig. 05
03) Set the L-Style locking bolt upright.
Fig. 06
04) Pull the L-Style locking bolt towards the Stand Stud
Adapter as illustrated in fig. 7.
Fig. 07
05) Keep pulling the L-style bolt and turn it right
simultaneously, until it is stuck tightly.
Fig. 08
6