Panel Operation; Channel Operation; Out On/Off; Set Voltage - ITech IT6302 User Manual

to the previous menu.When the item keeps filickering indicates it is selected currently.
Note: Both pressing Enter and down arrow key can display the next menu. But the difference
between the two methods is as follows: press enter key can save the current setup, while
press up/down key will not change the previous setup.

3.5 Panel Operation

3.5.1 Channel Operation

V-set V-set
When or
channels.

3.5.2 OUT ON/OFF

On/Off
Pressing button toggles the output state of all 3 channes of the power supply.If the
output state is ON,press it,to turn the output state to OFF.While the output state is
On/Off
OFF,press
To control channels individually,press
corresponding to each channel.
2
(Shift)+ controls the output state of the second channel,
output state of the third channel.
When the power supply is in remote mode,you can set the output state by sending SCPI
command(OUTPut: ON | OFF).The output state operation does not affect any other
parameter.
On/Off
Note: The
If you want to control the output state of individual channels,use the number keys 1-3
with shift button.

3.5.3 Set Voltage

Solution 1: press
Enter
followed by
Solution 2: Press
voltage value using the knob. Press
USER MANUAL
I-set I-set
button is lit, press
and the power supply output will turn ON.
(Shift)+
key controls the output state of all 3 channels simultaneously.
(Local) to select channel, press
.
V-set V-set
,then press
Esc
(Local) key can switch between the three
1
(Shift)+ ,
1
controls the output state of the first channel,
V-set V-set
to move the cursor position and adjust the
Enter
or to exit.
18
IT6302 user manual
2
(Shift)+ , (Shift)+
3
(Shift)+ controls the
then enter a numerical value
3