ITech IT6302 User Manual page 23

system will quit menu after 2s. For example, in output off state and Meter selected mode,
VFD displays as follows:
Picture 14
Wiring in serial mode:
Par (Parallel mode)
This parameter configures connection mode of CH1 and CH2 to parallel mode in menu
operation. Press
To set parallel mode of CH1 and CH2 in menu,press
through the menu list by Up/Down key to select COUP, using Right/Left key to select
PARA, press
And system will quit menu after 2s. For example, in output off state and Meter selected
mode, VFD displays as follows:
Picture 15
Wiring in Parallel mode
Esc
to confirm or
to confirm.VFD will indicate"Para SUCC" when operation is done.
to quit the operation.
(Shift) +
23
IT6302 user manual
(Menu)and scroll
USER MANUAL