Bluetooth Wireless Interface - Epson TM-P60II Technical Reference Manual

Notes on Wireless LAN Connection
Because not all the combinations of the printer and wireless LAN devices have been checked for
operation, the operation of the printer in combination with all the wireless LAN devices is not
guaranteed. Especially in the ad-hoc mode, the printer may not operate normally, depending on
the combination of the device to connect with. Be sure to carry out evaluation of the operation
before use.
Notes on use
• When you initialize or change the printer settings, the printer is reset to reflect the settings. It
may take about 1 minute depending on the network settings or environment. Also, your
application may indicate power off during the time waiting for reset. In that case, wait for
about 1 minute, and then reconnect to the printer.
• Where wireless LAN communication is in heavy traffic, your application may falsely recog-
nize that the communication is disconnected and indicate power off due to response delay. In
that case, disable Power Save to improve the trouble.

Bluetooth Wireless Interface

Countries where this product can be used
521, 552 models
Austria, Belgium, Bulgaria, Czech, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Ireland, Italy, Latvia, Lithuania, Luxemburg, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, UK, Australia*, New Zealand*, Hong
Kong
* Products with an RCM mark only.
In Italy, if used outside of own premises, general authorization is required.
511, 551 models
Canada, USA
94