External Component Description; Front Panel - Intellinet 560917 User Manual

Web-Managed Gigabit Ethernet Switch

1.3 External Component Description

1.3.1 Front Panel

The front panel of the switch features 24 10/100/1000Mbps RJ45 ports, two SFP ports,
one Console port, a Reset button and a series of LED indicators as shown below.
Figure 1 - Front Panel
10/100/1000Mbps RJ45 ports (1-24):
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps.
Each has a corresponding 10/100/1000Mbps LED.
SFP ports (SFP1, SFP2):
Designed to install the SFP module and connect to the device with a bandwidth of
1000Mbps. Each has a corresponding 1000Mbps LED.
Console port (Console):
Designed to connect with the serial port of a computer or terminal for monitoring and
configuring the switch.
Reset button (Reset):
Keep the device powered on and press the button for about 5 seconds. The system
restores the factory default settings.
LED indicators:
The LED indicators will allow you to monitor, diagnose and troubleshoot any potential
problem with the switch, connection or attached devices.
Figure 2 - LED Indicators
The following chart shows the LED indicators of the switch, along with an explanation of
each indicator.
5