2. Hardware Description
This section primarily presents the hardware of the switch, physical dimensions, appearance,
front panel, rear panel and LED indicators.
2.1 Dimensions
45 × 440 × 330 mm (H × W × D)
2.2 Appearance & Front Panel
The front panel of the switch consists of 24 gigabit RJ45 ports. Four of the gigabit RJ45 ports
(Ports 1–4) are in combo with the four gigabit SFP open slots. The LED Indicators are also
located on the front panel.
Appearance
LED Display
Reset Button
Front Panel
Note 1: The SFP ports are shared with normal RJ45 ports 1, 2, 3 and 4. For example: The
RJ45 Port 1 can not be used when SFP Port 1 is linked to a device.
Note 2: Press the Reset button for 5 seconds and the system configuration will be reset to the
default settings.
4 RJ-45/SFP
Combo ports
7
RJ-45 Port
IEEE 802.3at PSE