Cist Instance Setting - Intellinet 560917 User Manual

Yes: Enable BPDU filter function.

To avoid transmitting BPDU from the specified ports.
BPDU Guard: Set the BPDU Guard configuration.
No: Disable BPDU guard function.

Yes: Enable BPDU filter function.

To drop directly the received BPDU from the specified ports.
P2P MAC: Set the Point-to-Point port configuration.
No: Force to false state.

Yes: Force to true state.

Migrate: Forces the port to try to use the new MST/RST BPDUs, and hence to test the
hypothesis that all legacy systems that do not understand the new BPDU formats have
been removed from the LAN segment on the port(s).

4.5.3 CIST Instance Setting

To display the CIST Instance Setting page, click Spanning Tree > CIST Instance
Setting.
Priority: Set the Bridge Priority in the specified CIST instance.
Max Hops: Set the value of the maximum number of hops in the region.
Forward Delay: Set the delay time an interface takes to converge from blocking state to
forwarding state.
Max Age: Set the time any switch should wait before trying to change the STP topology
after unhearing Hello BPDU.
Tx Hold Count: Set the Transmit Hold Count used to limit BPDIU transmission rate.
Hello Time: Set the interval between periodic transmissions of BPDU by Designated
Ports.
Web-Managed Gigabit Ethernet Switch
34