Web-Managed Gigabit Ethernet Switch
4.10.5 RMA Setting
To display the RMA Setting page, click Mac Address Table > RMA Setting.
4.11 LLDP
LLDP is a one-way protocol; there are no request/response sequences. Information is
advertised by stations implementing the transmit function, and is received and processed
by stations implementing the receive function.
4.11.1 LLDP Global Setting
To display the LLDP Global Settings page, click LLDP > LLDP Global Setting.
Enabled: Enable/Disable the LLDP protocol on this switch.
Transmission Interval: Select the interval at which frames are transmitted. The default is
30 seconds, and the valid range is 5-32768 seconds.
Holdtime Multiplier: Select the multiplier onthe transmit interval to assign to TTL
(range 2-10, default = 4).
Reinitialization Delay: Select the delay before a re-initialization (range 1-10 seconds,
default = 2).
72