Stp Port Setting - Intellinet 560917 User Manual

Enabled: Set the STP status to be enabled/disabled on the switch.
BPDU Forward:
Choose BPDU packets is a flood or filtering.
Path Cost Method:
Choose the path overhead is short or long.
Force Version: Select the operating mode of STP.
STP-Compatible: 802.1D STP operation.

RSTP-Operation: 802.1w operation.

MSTP-Operation: 802.1s operation.

Configuration Revision: Set the Revision of the Configuration Identification (range:
0-65535).

4.5.2 STP Port Setting

To display the STP Port Setting page, click Spanning Tree > STP Port Setting.
Port Select: Select the port list to specify which ports should apply this setting.
External Path Cost: Set the port's contribution. When it is the root port, the root path cost
for the bridge. (0 means Auto).
Edge Port: Set the edge port configuration.
No: Force to false state (as link to a bridge).

Yes: Force to true state (as link to a host).

BPDU Filter: Set the BPDU Filter configuration.
No: Disable BPDU filter function.

Web-Managed Gigabit Ethernet Switch
33