Intellinet 560917 User Manual page 21

Web-Managed Gigabit Ethernet Switch
from the configuration settings to this page to configure the SNMP community.
4.1.6.5 SNMP User
To display the SNMP User page, click System > SNMP Management > SNMP User.
This page is used to create SNMP users in a group, which would have the same level of
security and access control permissions.
4.1.6.6 SNMPv1,2 Notification Recipients
A trap receiver entry contains the IP address of the node and the SNMP credentials
corresponding to the version that is included in the trap message. When an event arises
that requires a trap message to be sent, it is sent to every node listed in the Notification
Recipient Table.
To display the SNMPv1,2 Notification Recipients page, click System > SNMP
Management > SNMPv1,2 Notification Recipients.
This page contains recipients for SNMPv1,2. It allows you configure the destination to
which SNMP notifications are sent, and the types of SNMP notifications that are sent to
each destination (traps or informs). The Add/Edit pop-ups enable configuring the
20