1.3 External Component Description
1.3.1
Front Panel (Example shown from 560559)
Depending on your model number, the front panel of the Switch consists of up to
24 x 10/100/1000 Mbps RJ45 ports, 4 x 1000 Mbps SFP ports (and 4 x Uplink RJ45
ports), 1 x Console port, 1 x Reset button and a series of LED indicators as shown
as below.
E
A — 10/100/1000 Mbps RJ45 ports (1 – 24):
Designed to connect to a device with a bandwidth of 10 Mbps, 100 Mbps or 1000
Mbps. Each has a corresponding 10/100/1000 Mbps LED (see E — LED indicators
below).
B — SFP ports (SFP1, SFP2, 25S, etc.):
Designed to install an SFP module and connect to the device with a bandwidth of
1000 Mbps. Each has a corresponding 1000 Mbps LED.
Combo ports (25-28T) on model 561426:
The four SFP receiver slots are shared with four related RJ45 ports (25-28T). An
SFP port and a related RJ45 port are called "composite" ports, which means that
they can't be used at the same time. Either the SFP port works or the RJ45 port
works.
C — Console port (Console):
Designed to connect with the serial port of a computer or terminal for monitoring
and configuring the Switch.
D — Reset button (Reset):
With the device powered on, press down the button for about 5 seconds. The
system restores the factory default settings.
E — LED indicators:
The LED indicators will allow you to monitor, diagnose and troubleshoot any
potential problem with the Switch, connection or attached devices.
Web Smart Managed PoE Switches User Manual
D
6
A
C
B