Ip Configuration; User Configuration - Intellinet 560917 User Manual

System Name: System name of the switch. This name will also use as CLI prefix of each
line. ("Switch>" or "Switch#").
System Description: System location of the switch.
System Contact: System contact of the switch.

4.1.2 IP Configuration

To display the IP Configuration page, click System > IP Configuration.
This page allows you to edit the IP address, Subnet Mask and Gateway.
Mode: Select the mode of network connection.
Static: Enable static IP address.

DHCP: Enable DHCP to obtain IP information from a DHCP server on the network.

IP Address: If static mode is enabled, enter an IP address in this field.
Subnet Mask: If static mode is enabled, enter a subnet mask in this field.
Gateway: If static mode is enabled, enter a gateway address in this field.

4.1.3 User Configuration

To display the User Configuration page, click System > User Configuration.
This page allows you to Input User Name, Password Type and Password.
Web-Managed Gigabit Ethernet Switch
14