Table of Contents
Advertisement
2.1.2 Rack-mountable Installation in 19-inch Cabinet
The switch can be mounted in an EIA standard-sized, 19-inch rack, which can be placed
in a wiring closet with other equipment. To install the switch, follow these steps:
a.
Attach the mounting brackets on the switch's side panels (one on each side) and
secure them with the screws provided.
b.
Use the screws provided with the equipment rack to mount the switch on the rack and
tighten it.
2.1.3 Power on the Switch
The switch is powered on by connecting it to an outlet using the AC 100-240V 50/60Hz
internal high-performance power supply.
AC Electrical Outlet:
It is recommended to use a single-phase, three-wire receptacle with a neutral outlet or
multifunctional computer professional receptacle. Be sure to connect the metal ground
connector to the grounding source on the outlet.
AC Power Cord Connection:
Connect the AC power connector on the back panel of the switch to an external receptacle
Figure 5 - Bracket Installation
Figure 6 - Rack Installation
9
Web-Managed Gigabit Ethernet Switch
Hide quick links:
Advertisement
Table of Contents
