Call Waiting (Cw) - Intracom netMod User Manual

User's Manual of netMod Network Termination Unit
By using AT Commands, MSN numbers are assigned on the data port (RS232 or USB).
Type:
at&ziN= MSN number, to assign an MSN number on the data port
The number N takes the values:
N=6, for the first MSN port number
N=7, for the second MSN port number
N=8, for the third MSN port number
at&ziN= Enter key, to delete a previously assigned MSN number on the data port (N=6 or
7 or 8)
To view the MSN numbers assigned on both analogue ports (ab1 and ab2) and the data
port type:
at&zi?
Note that the above settings, initiated by AT Commands are
permanently stored in netMod's memory.
2.

Call Waiting (CW)

Using AT Commands write the proper values in the S79-Register to activate / deactivate
the supplementary services on each of netMod's analogue port (ab1 or ab2).
ATS79=0 deactivates the service on both analogue port ab1 and ab2
ATS79=4 activates the service on the analogue port ab1 and deactivates the service on
the analogue port ab2
ATS79=8 deactivates the service on the analogue port ab1 and activates the service on
the analogue port ab2
ATS79=12 activates the service on both analogue port ab1 and ab2
Note that this service is initially activated on both analogue ports
of netMod.
74