Call Waiting (Cw) - Intracom netMod User Manual

2.

Call Waiting (CW)

When this service is activated on an analogue port, the subscriber during his/her active
call receives a tone indicating an incoming call.
The incoming call is placed in a waiting state for a certain time period and the subscriber
can answer this waiting call by pressing:
FLASH 2
• The keys
same key combination is used to switch between the two calls).
FLASH 1
• The keys
FLASH 0
• The keys
When the subscriber ignores the call waiting indication, the waiting call is rejected after a
certain time period.
The call waiting can be activated on each analogue port by pressing
The call waiting can be deactivated on each analogue port by pressing
Note that this service is initially activated on both analogue ports
of netMod.
to accept the waiting call and place the active call on hold (the
to accept the waiting call and release the active call.
to reject the waiting call.
23
User's Manual of netMod Network Termination Unit
*43#
#43#