12.3. Call Forwarding on No Reply (CFNR)
In case of no answer in an incoming call for an subscriber number, the call is diverted to
another pre-selected number destination.
• The CFNR service for the subscriber number of an analogue port that is stored in a
memory location X (X='1' or '2' or '3') is activated by pressing:
*61*DialNumber*X#
MSN numbers available.
X takes the values '1' or '2' or '3'.
DIAL NUMBER is the subscriber number to which the call will be
forwarded after the (CFNR) service activation.
• The CFNR service for the subscriber number of an analogue port that is stored in a
memory location X (X='1' or '2' or '3') is deactivated by pressing
in case you don't have MSN numbers available
X takes the values '1' or '2' or '3'
• The inspection on whether the CFNR service is supported by the local ISDN
exchange for the subscriber number of an analogue port that is stored in memory
location X (X='1' or '2' or '3') is done by pressing
don't have MSN numbers available
X takes the values '1' or '2' or '3'
Then the subscriber will hear on the handset
• a continuous tone or a voice message when the service is supported
• an interrupted tone or a voice message when the service is not supported.
The [*X] parameter is optional for all the above commands. If no
value is assigned for the [*X] parameter, the subscriber number
that is forwarded is the one that is stored in memory location '1'.
User's Manual of netMod Network Termination Unit
*61*Dial Number#
or
31
in case you don't have
#61*X#
*#61*X#
*#61#
or
#61#
or
in case you
Need help?
Do you have a question about the netMod and is the answer not in the manual?