Selecting And Starting The Program (Start, Hold, Stop) - Lauda PROLINE Kryomats Series Operating Instructions Manual

7.8.2 Selecting and starting the program (Start, Hold, Stop)

Here you will learn how to select and start a program that has already been created. If no program has
been created
Command
Pump
Settings
Graph
Clock
Programmer
Interfaces
Control
Limits
Help Menu
Status
Edit
Loops
Graph
Info
Help Menu
Status
Edit
Loops
Graph
Info
Help Menu
62
7.8.4 "Creating or modifying a program (Edit)".
Program 1
Program 2
Program 3
Program 4
Program 5
Ramp function
End T
set
Start
End T
set
Hold
Stop
End Prog.1 running
−
Programmer
− Open the device parameter menu via the
soft key
− With the cursor keys continue to:
− Confirm with the key
T
fix
− The submenu
− Using the
program can be:
1. started
2. paused
3. continued
4. terminated
In addition, the standby key
T
programmer! (Pause operation).
fix
After standby is deactivated, the programmer
goes on! Commands, which, depending on the
situation, cannot be executed, are not displayed.
Continue
has been activated.
− Once the start has been confirmed with
bottom.
Starting up
Proline Kryomats
Program 1
Menu .
Programmer Program 1
.
Status appears.
Status menu, the selected
Start ,
Hold ,
Continue or
Stop .
stops the
therefore only appears when
, Prog. 1 running appears at the
YAUE0007 / 2/26/2009
.
Hold