Brief Operating Instructions - Lauda PROLINE Kryomats Series Operating Instructions Manual

Proline Kryomats
2

Brief operating instructions

1. Assemble unit and add items as appropriate (
The unit may NEVER be overturned nor put upside down!
Take care of the hose tubing connections (
2. Fill the unit with corresponding heat transfer liquid (
operation with non-flammable and flammable liquids to DIN EN 61010-2-010.
of the level of the heat transfer liquid! (
3. Compare the information on the rating label with the supply details.
4. Connect the unit only to a socket with a protective earth (PE) connection.
5. Check whether the switch
the "ON =
6. Check whether the switch
position.
7. Set the rotary switch
operating.
8. With
(
9. Now you see the current bath temperature in the
display, for example:
If instead, a warning or error message is displayed, then refer to Section 7.12.
YAUE0007 / 2/26/2009
These brief instructions shall give you the possibility to operate the unit quickly. For safe
operation of the unit, it is necessary to read carefully all the instructions and safety
notes!
–
" position.
set the overtemperature cut-off point to a value clearly above room temperature
7.12.1).
Brief operating instructions
6.1).
6.3 and 6.4).
6.3). The units are designed for
6.2).
at the back of the master control element is in
at the front of the master control element is in the "ON =
on the front panel to "ON =
Take care
l
". The unit starts
Bath-temperature
°C
/1%21
l
"
9